Listeners

{
  "name": "...",
  "address": "...",
  "filters": [],
  "ssl_context": "{...}",
  "bind_to_port": "...",
  "use_proxy_proto": "...",
  "use_original_dst": "...",
  "per_connection_buffer_limit_bytes": "...",
  "drain_type": "..."
}
name
(optional, string) The unique name by which this listener is known. If no name is provided, Envoy will allocate an internal UUID for the listener. If the listener is to be dynamically updated or removed via LDS a unique name must be provided. By default, the maximum length of a listener’s name is limited to 60 characters. This limit can be increased by setting the --max-obj-name-len command line argument to the desired value.
address
(required, string) The address that the listener should listen on. Currently only TCP listeners are supported, e.g., “tcp://127.0.0.1:80”. Note, “tcp://0.0.0.0:80” is the wild card match for any IPv4 address with port 80.
filters

(required, array) A list of individual network filters that make up the filter chain for connections established with the listener. Order matters as the filters are processed sequentially as connection events happen.

Note: If the filter list is empty, the connection will close by default.

ssl_context
(optional, object) The TLS context configuration for a TLS listener. If no TLS context block is defined, the listener is a plain text listener.
bind_to_port
(optional, boolean) Whether the listener should bind to the port. A listener that doesn’t bind can only receive connections redirected from other listeners that set use_original_dst parameter to true. Default is true.
use_proxy_proto
(optional, boolean) Whether the listener should expect a PROXY protocol V1 header on new connections. If this option is enabled, the listener will assume that that remote address of the connection is the one specified in the header. Some load balancers including the AWS ELB support this option. If the option is absent or set to false, Envoy will use the physical peer address of the connection as the remote address.
use_original_dst
(optional, boolean) If a connection is redirected using iptables, the port on which the proxy receives it might be different from the original destination address. When this flag is set to true, the listener hands off redirected connections to the listener associated with the original destination address. If there is no listener associated with the original destination address, the connection is handled by the listener that receives it. Defaults to false.
per_connection_buffer_limit_bytes
(optional, integer) Soft limit on size of the listener’s new connection read and write buffers. If unspecified, an implementation defined default is applied (1MiB).
drain_type
(optional, string) The type of draining that the listener does. Allowed values include default and modify_only. See the draining architecture overview for more information.

Filters

Network filter architecture overview.

{
  "name": "...",
  "config": "{...}"
}
name
(required, string) The name of the filter to instantiate. The name must match a supported filter.
config
(required, object) Filter specific configuration which depends on the filter being instantiated. See the supported filters for further documentation.

TLS context

TLS architecture overview.

{
  "cert_chain_file": "...",
  "private_key_file": "...",
  "alpn_protocols": "...",
  "alt_alpn_protocols": "...",
  "ca_cert_file": "...",
  "verify_certificate_hash": "...",
  "verify_subject_alt_name": [],
  "crl_file": "...",
  "cipher_suites": "...",
  "ecdh_curves": "...",
  "session_ticket_key_paths": []
}
cert_chain_file
(required, string) The certificate chain file that should be served by the listener.
private_key_file
(required, string) The private key that corresponds to the certificate chain file.
alpn_protocols

(optional, string) Supplies the list of ALPN protocols that the listener should expose. In practice this is likely to be set to one of two values (see the codec_type parameter in the HTTP connection manager for more information):

  • “h2,http/1.1” If the listener is going to support both HTTP/2 and HTTP/1.1.
  • “http/1.1” If the listener is only going to support HTTP/1.1
alt_alpn_protocols
(optional, string) An alternate ALPN protocol string that can be switched to via runtime. This is useful for example to disable HTTP/2 without having to deploy a new configuration.
ca_cert_file
(optional, string) A file containing certificate authority certificates to use in verifying a presented client side certificate. If not specified and a client certificate is presented it will not be verified. By default, a client certificate is optional, unless one of the additional options ( require_client_certificate, verify_certificate_hash or verify_subject_alt_name) is also specified.
require_client_certificate
(optional, boolean) If specified, Envoy will reject connections without a valid client certificate.
verify_certificate_hash
(optional, string) If specified, Envoy will verify (pin) the hash of the presented client side certificate.
verify_subject_alt_name
(optional, array) An optional list of subject alt names. If specified, Envoy will verify that the client certificate’s subject alt name matches one of the specified values.
crl_file
(optional, string) An optional certificate revocation list (in PEM format). If specified, Envoy will verify that the presented peer certificate has not been revoked by this CRL. If this file contains multiple CRLs, all of them will be used.
cipher_suites
(optional, string) If specified, the TLS listener will only support the specified cipher list. If not specified, the default list:
[ECDHE-ECDSA-AES128-GCM-SHA256|ECDHE-ECDSA-CHACHA20-POLY1305]
[ECDHE-RSA-AES128-GCM-SHA256|ECDHE-RSA-CHACHA20-POLY1305]
ECDHE-ECDSA-AES128-SHA256
ECDHE-RSA-AES128-SHA256
ECDHE-ECDSA-AES128-SHA
ECDHE-RSA-AES128-SHA
AES128-GCM-SHA256
AES128-SHA256
AES128-SHA
ECDHE-ECDSA-AES256-GCM-SHA384
ECDHE-RSA-AES256-GCM-SHA384
ECDHE-ECDSA-AES256-SHA384
ECDHE-RSA-AES256-SHA384
ECDHE-ECDSA-AES256-SHA
ECDHE-RSA-AES256-SHA
AES256-GCM-SHA384
AES256-SHA256
AES256-SHA

will be used.

ecdh_curves
(optional, string) If specified, the TLS connection will only support the specified ECDH curves. If not specified, the default curves (X25519, P-256) will be used.
session_ticket_key_paths

(optional, array) Paths to keyfiles for encrypting and decrypting TLS session tickets. The first keyfile in the array contains the key to encrypt all new sessions created by this context. All keys are candidates for decrypting received tickets. This allows for easy rotation of keys by, for example, putting the new keyfile first, and the previous keyfile second.

If session_ticket_key_paths is not specified, the TLS library will still support resuming sessions via tickets, but it will use an internally-generated and managed key, so sessions cannot be resumed across hot restarts or on different hosts.

Each keyfile must contain exactly 80 bytes of cryptographically-secure random data. For example, the output of openssl rand 80.

Attention

Using this feature has serious security considerations and risks. Improper handling of keys may result in loss of secrecy in connections, even if ciphers supporting perfect forward secrecy are used. See https://www.imperialviolet.org/2013/06/27/botchingpfs.html for some discussion. To minimize the risk, you must:

  • Keep the session ticket keys at least as secure as your TLS certificate private keys
  • Rotate session ticket keys at least daily, and preferably hourly
  • Always generate keys using a cryptographically-secure random data source