UDP proxy¶
This filter should be configured with the type URL
type.googleapis.com/envoy.extensions.filters.udp.udp_proxy.v3.UdpProxyConfig
.
Overview¶
The UDP proxy listener filter allows Envoy to operate as a non-transparent proxy between a UDP client and server. The lack of transparency means that the upstream server will see the source IP and port of the Envoy instance versus the client. All datagrams flow from the client, to Envoy, to the upstream server, back to Envoy, and back to the client.
Because UDP is not a connection oriented protocol, Envoy must keep track of a client’s session such that the response datagrams from an upstream server can be routed back to the correct client. Each session is index by the 4-tuple consisting of source IP/port and local IP/port that the datagram is received on. Sessions last until the idle timeout is reached.
Above session stickness could be disabled by setting use_per_packet_load_balancing to true. In that case, per packet load balancing is enabled. It means that upstream host is selected on every single data chunk received by udp proxy using currently used load balancing policy.
The UDP proxy listener filter also can operate as a transparent proxy if the use_original_src_ip field is set to true. But please keep in mind that it does not forward the port to upstreams. It forwards only the IP address to upstreams.
Load balancing and unhealthy host handling¶
Envoy will fully utilize the configured load balancer for the configured upstream cluster when load balancing UDP datagrams. By default, when a new session is created, Envoy will associate the session with an upstream host selected using the configured load balancer. All future datagrams that belong to the session will be routed to the same upstream host. However, if use_per_packet_load_balancing field is set to true, Envoy selects another upstream host on next datagram using the configured load balancer and creates a new session if such does not exist. So in case of several upstream hosts available for the load balancer each data chunk is forwarded to a different host.
When an upstream host becomes unhealthy (due to active health checking), Envoy will attempt to create a new session to a healthy host when the next datagram is received.
Circuit breaking¶
The number of sessions that can be created per upstream cluster is limited by the cluster’s maximum connection circuit breaker. By default this is 1024.
Routing¶
The filter can route different datagrams to different upstream clusters with their source addresses. The matching API can be used with UDP routing, by specifying a matcher, a UDP network input as the matching rule and Route as the resulting action.
The following matcher configuration will lead Envoy to route UDP datagrams according to their source IPs, ignore datagrams other than those with a source IP of 127.0.0.1, and then filter the remaining datagrams to different clusters according to their source ports.
14 matcher:
15 # The outer matcher list matches source IP.
16 matcher_list:
17 matchers:
18 - predicate:
19 single_predicate:
20 input:
21 name: envoy.matching.inputs.source_ip
22 typed_config:
23 '@type': type.googleapis.com/envoy.extensions.matching.common_inputs.network.v3.SourceIPInput
24 value_match:
25 exact: 127.0.0.1
26 on_match:
27 matcher:
28 # The inner matcher tree matches source port.
29 matcher_tree:
30 input:
31 name: envoy.matching.inputs.source_port
32 typed_config:
33 '@type': type.googleapis.com/envoy.extensions.matching.common_inputs.network.v3.SourcePortInput
34 exact_match_map:
35 map:
36 "80":
37 action:
38 name: route
39 typed_config:
40 '@type': type.googleapis.com/envoy.extensions.filters.udp.udp_proxy.v3.Route
41 cluster: udp_service
42 "443":
43 action:
44 name: route
45 typed_config:
46 '@type': type.googleapis.com/envoy.extensions.filters.udp.udp_proxy.v3.Route
47 cluster: udp_service2
48 on_no_match:
49 action:
50 name: route
51 typed_config:
52 '@type': type.googleapis.com/envoy.extensions.filters.udp.udp_proxy.v3.Route
53 cluster: udp_service3
Example configuration¶
The following example configuration will cause Envoy to listen on UDP port 1234 and proxy to a UDP server listening on port 1235, allowing 9000 byte packets in both directions (i.e., either jumbo frames or fragmented IP packets).
1admin:
2 address:
3 socket_address:
4 protocol: TCP
5 address: 127.0.0.1
6 port_value: 9901
7static_resources:
8 listeners:
9 - name: listener_0
10 address:
11 socket_address:
12 protocol: UDP
13 address: 127.0.0.1
14 port_value: 1234
15 udp_listener_config:
16 downstream_socket_config:
17 max_rx_datagram_size: 9000
18 listener_filters:
19 - name: envoy.filters.udp_listener.udp_proxy
20 typed_config:
21 '@type': type.googleapis.com/envoy.extensions.filters.udp.udp_proxy.v3.UdpProxyConfig
22 stat_prefix: service
23 matcher:
24 on_no_match:
25 action:
26 name: route
27 typed_config:
28 '@type': type.googleapis.com/envoy.extensions.filters.udp.udp_proxy.v3.Route
29 cluster: service_udp
30 upstream_socket_config:
31 max_rx_datagram_size: 9000
32 clusters:
33 - name: service_udp
34 type: STATIC
35 lb_policy: ROUND_ROBIN
36 load_assignment:
37 cluster_name: service_udp
38 endpoints:
39 - lb_endpoints:
40 - endpoint:
41 address:
42 socket_address:
43 address: 127.0.0.1
44 port_value: 1235
Statistics¶
The UDP proxy filter emits both its own downstream statistics as well as many of the cluster upstream statistics where applicable. The downstream statistics are rooted at udp.<stat_prefix>. with the following statistics:
Name |
Type |
Description |
---|---|---|
downstream_sess_no_route |
Counter |
Number of datagrams not routed due to no cluster |
downstream_sess_rx_bytes |
Counter |
Number of bytes received |
downstream_sess_rx_datagrams |
Counter |
Number of datagrams received |
downstream_sess_rx_errors |
Counter |
Number of datagram receive errors |
downstream_sess_total |
Counter |
Number sessions created in total |
downstream_sess_tx_bytes |
Counter |
Number of bytes transmitted |
downstream_sess_tx_datagrams |
Counter |
Number of datagrams transmitted |
downstream_sess_tx_errors |
Counter |
Number of datagram transmission errors |
idle_timeout |
Counter |
Number of sessions destroyed due to idle timeout |
downstream_sess_active |
Gauge |
Number of sessions currently active |
The following standard upstream cluster stats are used by the UDP proxy:
Name |
Type |
Description |
---|---|---|
upstream_cx_none_healthy |
Counter |
Number of datagrams dropped due to no healthy hosts |
upstream_cx_overflow |
Counter |
Number of datagrams dropped due to hitting the session circuit breaker |
upstream_cx_rx_bytes_total |
Counter |
Number of bytes received |
upstream_cx_tx_bytes_total |
Counter |
Number of bytes transmitted |
The UDP proxy filter also emits custom upstream cluster stats prefixed with cluster.<cluster_name>.udp.:
Name |
Type |
Description |
---|---|---|
sess_rx_datagrams |
Counter |
Number of datagrams received |
sess_rx_datagrams_dropped |
Counter |
Number of datagrams dropped due to kernel overflow or truncation |
sess_rx_errors |
Counter |
Number of datagram receive errors |
sess_tx_datagrams |
Counter |
Number of datagrams transmitted |
sess_tx_errors |
Counter |
Number of datagrams transmitted |