Redis Proxy¶
This extension may be referenced by the qualified name envoy.filters.network.redis_proxy
Note
This extension is not hardened and should only be used in deployments where both the downstream and upstream are trusted.
Redis Proxy configuration overview.
config.filter.network.redis_proxy.v2.RedisProxy¶
[config.filter.network.redis_proxy.v2.RedisProxy proto]
{
"stat_prefix": "...",
"cluster": "...",
"settings": "{...}",
"latency_in_micros": "...",
"prefix_routes": "{...}",
"downstream_auth_password": "{...}"
}
- stat_prefix
(string, REQUIRED) The prefix to use when emitting statistics.
- cluster
(string) Name of cluster from cluster manager. See the configuration section of the architecture overview for recommendations on configuring the backing cluster.
Attention
This field is deprecated. Use a catch_all route instead.
- settings
(config.filter.network.redis_proxy.v2.RedisProxy.ConnPoolSettings, REQUIRED) Network settings for the connection pool to the upstream clusters.
- latency_in_micros
(bool) Indicates that latency stat should be computed in microseconds. By default it is computed in milliseconds.
- prefix_routes
(config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes) List of unique prefixes used to separate keys from different workloads to different clusters. Envoy will always favor the longest match first in case of overlap. A catch-all cluster can be used to forward commands when there is no match. Time complexity of the lookups are in O(min(longest key prefix, key length)).
Example:
prefix_routes: routes: - prefix: "ab" cluster: "cluster_a" - prefix: "abc" cluster: "cluster_b"
When using the above routes, the following prefixes would be sent to:
get abc:users
would retrieve the key ‘abc:users’ from cluster_b.get ab:users
would retrieve the key ‘ab:users’ from cluster_a.get z:users
would return a NoUpstreamHost error. A catch-all route would have retrieved the key from that cluster instead.
See the configuration section of the architecture overview for recommendations on configuring the backing clusters.
- downstream_auth_password
(core.DataSource) Authenticate Redis client connections locally by forcing downstream clients to issue a Redis AUTH command with this password before enabling any other command. If an AUTH command’s password matches this password, an “OK” response will be returned to the client. If the AUTH command password does not match this password, then an “ERR invalid password” error will be returned. If any other command is received before AUTH when this password is set, then a “NOAUTH Authentication required.” error response will be sent to the client. If an AUTH command is received when the password is not set, then an “ERR Client sent AUTH, but no password is set” error will be returned.
config.filter.network.redis_proxy.v2.RedisProxy.ConnPoolSettings¶
[config.filter.network.redis_proxy.v2.RedisProxy.ConnPoolSettings proto]
Redis connection pool settings.
{
"op_timeout": "{...}",
"enable_hashtagging": "...",
"enable_redirection": "...",
"max_buffer_size_before_flush": "...",
"buffer_flush_timeout": "{...}",
"max_upstream_unknown_connections": "{...}",
"enable_command_stats": "...",
"read_policy": "..."
}
- op_timeout
(Duration, REQUIRED) Per-operation timeout in milliseconds. The timer starts when the first command of a pipeline is written to the backend connection. Each response received from Redis resets the timer since it signifies that the next command is being processed by the backend. The only exception to this behavior is when a connection to a backend is not yet established. In that case, the connect timeout on the cluster will govern the timeout until the connection is ready.
- enable_hashtagging
(bool) Use hash tagging on every redis key to guarantee that keys with the same hash tag will be forwarded to the same upstream. The hash key used for determining the upstream in a consistent hash ring configuration will be computed from the hash tagged key instead of the whole key. The algorithm used to compute the hash tag is identical to the redis-cluster implementation.
Examples:
‘{user1000}.following’ and ‘{user1000}.followers’ will be sent to the same upstream
‘{user1000}.following’ and ‘{user1001}.following’ might be sent to the same upstream
- enable_redirection
(bool) Accept moved and ask redirection errors from upstream redis servers, and retry commands to the specified target server. The target server does not need to be known to the cluster manager. If the command cannot be redirected, then the original error is passed downstream unchanged. By default, this support is not enabled.
- max_buffer_size_before_flush
(uint32) Maximum size of encoded request buffer before flush is triggered and encoded requests are sent upstream. If this is unset, the buffer flushes whenever it receives data and performs no batching. This feature makes it possible for multiple clients to send requests to Envoy and have them batched- for example if one is running several worker processes, each with its own Redis connection. There is no benefit to using this with a single downstream process. Recommended size (if enabled) is 1024 bytes.
- buffer_flush_timeout
(Duration) The encoded request buffer is flushed N milliseconds after the first request has been encoded, unless the buffer size has already exceeded max_buffer_size_before_flush. If max_buffer_size_before_flush is not set, this flush timer is not used. Otherwise, the timer should be set according to the number of clients, overall request rate and desired maximum latency for a single command. For example, if there are many requests being batched together at a high rate, the buffer will likely be filled before the timer fires. Alternatively, if the request rate is lower the buffer will not be filled as often before the timer fires. If max_buffer_size_before_flush is set, but buffer_flush_timeout is not, the latter defaults to 3ms.
- max_upstream_unknown_connections
(UInt32Value) max_upstream_unknown_connections controls how many upstream connections to unknown hosts can be created at any given time by any given worker thread (see enable_redirection for more details). If the host is unknown and a connection cannot be created due to enforcing this limit, then redirection will fail and the original redirection error will be passed downstream unchanged. This limit defaults to 100.
- enable_command_stats
(bool) Enable per-command statistics per upstream cluster, in addition to the filter level aggregate count.
- read_policy
(config.filter.network.redis_proxy.v2.RedisProxy.ConnPoolSettings.ReadPolicy) Read policy. The default is to read from the master.
Enum config.filter.network.redis_proxy.v2.RedisProxy.ConnPoolSettings.ReadPolicy¶
[config.filter.network.redis_proxy.v2.RedisProxy.ConnPoolSettings.ReadPolicy proto]
ReadPolicy controls how Envoy routes read commands to Redis nodes. This is currently supported for Redis Cluster. All ReadPolicy settings except MASTER may return stale data because replication is asynchronous and requires some delay. You need to ensure that your application can tolerate stale data.
- MASTER
(DEFAULT) Default mode. Read from the current master node.
- PREFER_MASTER
Read from the master, but if it is unavailable, read from replica nodes.
- REPLICA
Read from replica nodes. If multiple replica nodes are present within a shard, a random node is selected. Healthy nodes have precedent over unhealthy nodes.
- PREFER_REPLICA
Read from the replica nodes (similar to REPLICA), but if all replicas are unavailable (not present or unhealthy), read from the master.
- ANY
Read from any node of the cluster. A random node is selected among the master and replicas, healthy nodes have precedent over unhealthy nodes.
config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes¶
[config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes proto]
{
"routes": [],
"case_insensitive": "...",
"catch_all_cluster": "...",
"catch_all_route": "{...}"
}
- routes
(config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes.Route) List of prefix routes.
- case_insensitive
(bool) Indicates that prefix matching should be case insensitive.
- catch_all_cluster
(string) Optional catch-all route to forward commands that doesn’t match any of the routes. The catch-all route becomes required when no routes are specified. .. attention:
This field is deprecated. Use a :ref:`catch_all route<envoy_api_field_config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes.catch_all_route>` instead.
- catch_all_route
(config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes.Route) Optional catch-all route to forward commands that doesn’t match any of the routes. The catch-all route becomes required when no routes are specified.
config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes.Route¶
[config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes.Route proto]
{
"prefix": "...",
"remove_prefix": "...",
"cluster": "...",
"request_mirror_policy": []
}
- prefix
(string) String prefix that must match the beginning of the keys. Envoy will always favor the longest match.
- remove_prefix
(bool) Indicates if the prefix needs to be removed from the key when forwarded.
- cluster
(string, REQUIRED) Upstream cluster to forward the command to.
- request_mirror_policy
(config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes.Route.RequestMirrorPolicy) Indicates that the route has a request mirroring policy.
config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes.Route.RequestMirrorPolicy¶
[config.filter.network.redis_proxy.v2.RedisProxy.PrefixRoutes.Route.RequestMirrorPolicy proto]
The router is capable of shadowing traffic from one cluster to another. The current implementation is “fire and forget,” meaning Envoy will not wait for the shadow cluster to respond before returning the response from the primary cluster. All normal statistics are collected for the shadow cluster making this feature useful for testing.
{
"cluster": "...",
"runtime_fraction": "{...}",
"exclude_read_commands": "..."
}
- cluster
(string, REQUIRED) Specifies the cluster that requests will be mirrored to. The cluster must exist in the cluster manager configuration.
- runtime_fraction
(core.RuntimeFractionalPercent) If not specified or the runtime key is not present, all requests to the target cluster will be mirrored.
If specified, Envoy will lookup the runtime key to get the percentage of requests to the mirror.
- exclude_read_commands
(bool) Set this to TRUE to only mirror write commands, this is effectively replicating the writes in a “fire and forget” manner.
config.filter.network.redis_proxy.v2.RedisProtocolOptions¶
[config.filter.network.redis_proxy.v2.RedisProtocolOptions proto]
RedisProtocolOptions specifies Redis upstream protocol options. This object is used in typed_extension_protocol_options, keyed by the name envoy.filters.network.redis_proxy.
{
"auth_password": "{...}"
}
- auth_password
(core.DataSource) Upstream server password as defined by the requirepass directive <https://redis.io/topics/config>`_ in the server’s configuration file.